Bearing Pad Replacement
Bearing pads are an integral part of almost every concrete structure, allowing movement to occur between various segments without damaging the structure.  Bearing pads wear out however, and often need to be replaced.  The most common bearing pad replacement scenario is the hundreds of pads in a typical precast parking garage, one under every “T” stem.  Some of the more challenging bearing pad replacement projects are on large bridges such as the one depicted in this picture.  The Pine Valley Bridge just outside San Diego California required 2,500,000 pounds of force to lift the enormous concrete box girder section at the abutment.  Truesdell completed the task without a hitch.   So, most bearing pad replacement projects are more about the effort in lifting and jacking of the structure than about the cost of the pad itself.


Home | Affiliations | Mission Statement | Products | Careers | Contact Us | Plan Room | List of Services | Employee Mail | Site Map

Our Licences: Arizona: ROC208273-B04;ROC147478-KA;ROC137832-K5;ROC163145-B1 - Califorina: 615058 A,C61,C33,D06
Idaho:00703-AA-1-2-3-AA - Iowa: C10293 - Nevada: 68575-A - New Mexico: 91865-GB98
North Dakota: 42461-Class A - Utah: 9609940-5501-B100, E100

1310 W. 23rd Street - Tempe, Arizona 85282 - Phone (602) 437-1711 - Fax (602) 437-1821
Copyright © 2013 Truesdell Corporation. Designed by Alex Van Der Werf.